Cadovius Roayl Wall Unit - Cabinet Mounts

Last Post

RSS

tobi

(@tobi)

New Member

Joined: 14 years ago

Posts: 1

05/01/2014 8:32 pm

Hello
We have a lovely Cadovius Royal three bay system that was passed on to us after being in storage.
we have worked out most of the system and have it mounted on the wall with all the shelves working fine, however...
We just can't figure out the cabinets and assume there are some brackets missing that fit on to the standards, onto which the cabinets sit - we can see the metal angle on the cabinets.
Could anyone describe to us please, just what we are look for please and therefore how the cabinets mount.
Or are we just being daft and missing the obvious?
Many thanks
Tobi

Quote

atomicmod

(@atomicmod)

Trusted Member

Joined: 14 years ago

Posts: 73

05/01/2014 11:23 pm

Cado cabinets.
From the ones I have had: The cabinets attach at four points. The bottom of the cabinet sits on two pegs inserted in the rails, just like putting in the shelves. Inside the cabinets, in the upper corners, should be two spring actuated pegs that pop into the rails. Hope this helps.

ReplyQuote

Robert Leach

(@robertleach1960yahoo-co-uk)

Illustrious Member

Joined: 5 years ago

Posts: 3212

06/01/2014 12:34 am

and with mine
there were metal 'dowels' that went through the uprights, and the units hung on those.

ReplyQuote

atomicmod

(@atomicmod)

Trusted Member

Joined: 14 years ago

Posts: 73

06/01/2014 12:56 am

dowels
Come to think of it, some had the spring loaded and some had long metal pegs/dowels.

ReplyQuote

jesgord

(@jesgord)

Illustrious Member

Joined: 14 years ago

Posts: 1879

06/01/2014 1:05 am

Mine came without the metal...
Mine came without the metal dowels-so I went to home depot, bought a metal rod the correct diameter and cut pieces to size.

ReplyQuote