Design Addict

Cart

Tulip Swivel Chairs...
 

Tulip Swivel Chairs comes loose  

  RSS

swashbuckler
(@tom-eldridgegmail-com)
New Member
Joined: 6 years ago
Posts: 2
17/09/2010 2:18 am  

I have four tulip chairs and each of them come loose over time. They are the swivel variety with a metal rod fixing the chair with The base. There is a nut holding the rod on place at the bottom of the chair but this works loose over a few weeks.

Is there anything I can do to prevent this bolt coming loose? From memory there was a ring that came with each chair but was not sure how this fitted in with the bolt and rod.

Any help would be most appreciated


Quote
kevin.retrodesign
(@kevin-retrodesigngmail-com)
Eminent Member
Joined: 6 years ago
Posts: 22
06/10/2010 3:26 am  

Photos
Hello, can you show photos of your tulip chair? I'd like to take a look at the parts and bolt you are talking about, and the extra piece.
Regards


ReplyQuote
swashbuckler
(@tom-eldridgegmail-com)
New Member
Joined: 6 years ago
Posts: 2
20/10/2010 3:04 pm  

I've attached the following p...
I've attached the following photo.
One photo shows the base of the chair with the nut and the circular thimble.
And the other photo shows a circular metal band that I'm assuming prevents the nut from coming loose if the chair is swivelled about over time.
The trouble is I'm not 100% sure how the metal band fits with the nut and circular thimble.
Is it from the bottom up Thimble > band > nut or some other combination?
The second point is how easy is it to get the exact size band as I'm missing two?
Links to Photos below
http://flic.kr/p/8NEwWzhttp://flic.kr/p/8NHBSu


ReplyQuote
Share:

If you need any help, please contact us at – info@designaddict.com

  
Working

Please Login or Register