Design Addict

Cart

Plycraft Mr. Chair ...
 

Plycraft Mr. Chair help  

Page 2 / 2
  RSS

(@muehlebach)
Famed Member
Joined: 15 years ago
Posts: 304
10/02/2014 5:14 pm  

I found this picture on eBay
As you can see, there should be a metal block here. The block is about 3/16 inches thick and maybe 3/4 inches long. It is just big enough to keep the bolt from turning. I think this is your problem, but correct me if I am wrong.


ReplyQuote
blouisdiddy
(@blouisdiddy)
New Member
Joined: 15 years ago
Posts: 1
20/05/2014 4:38 am  

is this thread still alive? Anyone have a solution
would love to remove the "drop back" in my Mr. Chair. Anyone ever find a good solution? thanks
B


ReplyQuote
(@muehlebach)
Famed Member
Joined: 15 years ago
Posts: 304
20/05/2014 5:26 am  

blouisdiddy
Is your hardware similar to the ones shown on this thread? Plycraft used several different shocks.


ReplyQuote
Page 2 / 2
Share:

If you need any help, please contact us at – info@designaddict.com

  
Working

Please Login or Register