Design Addict

Cart

McCobb planner grou...
 

McCobb planner group help  

  RSS

Redandyellowcametobe
(@redandyellowcametobe)
Trusted Member
Joined: 2026 years ago
Posts: 63
29/10/2017 2:36 am  

Quote
tktoo
(@tktoo)
Illustrious Member
Joined: 15 years ago
Posts: 2287
29/10/2017 3:28 am  

Pictures are worth thousands of words!


ReplyQuote
Redandyellowcametobe
(@redandyellowcametobe)
Trusted Member
Joined: 2026 years ago
Posts: 63
29/10/2017 3:36 am  

Here's a couple I snapped. Sorry for the poor lighting. Thanks!


ReplyQuote
tktoo
(@tktoo)
Illustrious Member
Joined: 15 years ago
Posts: 2287
29/10/2017 12:51 pm  

Much better!

I'd try to stick it back down. The concern is compatibility between the new and residue of the old adhesive. You can do spot tests with a cotton swab starting with water to see if the residue dissolves. If It does, either a vegetable starch paste or even Elmer's school glue are safe to try (apply thin very thin coat to both surfaces and weight or clamp until dry - do front side of panel first and backside after)

If the old residue does not dissolve in water, it gets a bit trickier...


ReplyQuote
Spanky
(@spanky)
Illustrious Member
Joined: 6 years ago
Posts: 4376
29/10/2017 9:39 pm  

You can buy grasscloth wallpaper if you want to replace the covering completely but a lot of it is more coarse than what's on there. The fiber is from the pandanus genus of tropical plants and the woven fabric is often called "pandan cloth".

Kravet textiles has a pandan cloth but it's a poly-cotton blend, not actual pandan fibers.

I'd try to restore what's on there before replacing it, though. Is it brittle? You may need to dampen it first to ensure that it doesn't crack when you flatten it out. And if you go that route, apply water very sparingly and give it time to work before you flatten the cloth (like a day or two with each dampening), AND it's probably best to dampen the whole surface so that you don't get water marks.

Figure out your clamping set-up ahead of time. And lay some wax paper (grocery store item) between the pandan and your clamping board so that any glue that seeps onto the pandan will not also stick to the board.

That's what I'd do, anyway. Someone else may have a better idea!


ReplyQuote
Redandyellowcametobe
(@redandyellowcametobe)
Trusted Member
Joined: 2026 years ago
Posts: 63
31/10/2017 2:51 am  

Thanks again guys! 🙂 Spanky, i find myself stunned in the knowledge you possess in that head of yours! Truly awesome. I'll give it the 'ol college try and see how it comes out!


ReplyQuote
Share:

If you need any help, please contact us at – info@designaddict.com

  
Working

Please Login or Register