Sew An Invisible Zipper: 08 Simple Steps That Need to Know
When it arrives at sewing zippers, believe it or not, the hidden zipper is one of the easiest to embed, even when you don't use the best heavy duty sewing machine for home sewing. How is that possible?
Sewing an invisible zipper is the one zipper utilization where no machine stitching is apparent from the right side of the garment or project. All of the stitching is done behind the views, if you will, totally covered within the seam allowances. It’s the main reason for using this type of zipper in your sewing, but it is also what makes it the most straightforward to insert.
What is a hidden zipper?
A hidden zipper can be applied using a standard zipper foot with relative ease, but by all means, invest in a presser foot designed for such applications. They make the form super fast and so much easier, making it well worth the investment.
Steps to insert this type of zipper using an invisible zipper foot
Step 1: First and foremost, when applying this type of zipper, it is best to do them when joining pieces are still in a flat state, or other words before identical pieces are assembled or joined together. It is also essential to note that when applying an invisible type zipper, the application is made from the right side of the project - as opposed to all other types of zipper applications.
Step 2: Prepare the seam edges. Finish or serge the joining seam sides before implementing the zipper. Place the joining seam edges side by side, right side up. In the case of a skirt or dress application, do not sew in the back stitching. Then, place a mark ¾ inches from the top edges of both pieces using either a straight pin, chalk or fabric marking pen — anything that will not leave a permanent mark on the project. Then, let's let your best starter sewing machine do its job well.
Step 3: Next, mark a ⅝ inch seam line forward the corresponding seam edges, again, with either straight pins, chalk or textile pen.
Step 4: Adjust the zipper. Open up the zipper and press out the folded zipper teeth, so they lay slightly flat.
Step 5: With the zipper opened up and right side down, laze the zipper teeth along the marked ⅝ inch stitching line and pin securely in place. Pinning in place should be adequate if the fabric is stable. If the material is slippery or thick and more likely to shift during stitching, hand baste the zipper in place to keep it securely in place throughout the application process.
Step 6: To stitch the zipper in point, position the zipper teeth under the proper depression in the presser foot and stitch until the presser foot reaches the zipper stop. Backstitch to lock and lift.
Step 7: With the joining pieces placing side by side, flip the part with the zipper sewn in place. This puts the similar side of the zipper in position for placement. Then, with the help of your best starter sewing machine, you will repeat steps 5 and 6.
Step 8: The last step is to sew the joint below the zipper using a regular zipper foot. Put the foot as close to the zipper stitching as possible, making sure to move the zipper tail out of the way. Now, you've completed the seam.